3D-Druck: Kristallisationskinetik von Polyamid 12 während des selektiven Lasersinterns

Powder Bed Fusion (PBF), auch als Selektives Lasersintern (SLS) bezeichnet, ist eine Technologie zum schichtweisen Aufbau von 3D-Objekten, bei der ein Laserstrahl selektiv über einen vordefinierten Bereich der Pulverschicht fährt. Eines der dabei am häufigsten verwendeten Materialien ist PA12.

Read more

3D Printing: Crystallization Kinetics of Polyamide 12 during Selective Laser Sintering

Powder Bed Fusion (PBF), also called Selective Laser Sintering (SLS), is the layer-by-layer construction technology of 3D objects, where a laser beam selectively traces over a predefined area on the powder layer. One of the most widely used materials is PA12.

Read more

Material Science in Additive Manufacturing: Evaluation of Refreshing Strategy of PBF Powder using DSC

Today, Dr. Natalie Rudolph will talk about the refreshing strategy for Powder Bed Fusion powders using Differential Scanning Calorimetry. In this episode, not the part properties, but the properties of the powder will be investigated.

Read more

Material Science in Additive Manufacturing: Specific Heat Capacity of PA12 Powder

In our previous episode, Dr. Natalie Rudolph informed about the isothermal measurements and their importance for process simulation. Today, we talk about measuring the specific heat capacity of Powder Bed Fusion Powder and what it is needed for.

Read more

Material Science in Additive Manufacturing: Crystallization Behavior in Polymer PBF

Today’s focus is on the crystallization behavior in Polymer Powder Bed Fusion using Differential Scanning Calorimetry (DSC). Find out more about the time dependence of crystallization with the example of a semi-crystalline thermoplastic and learn about isothermal crystallization of Nylon PA12 powder.

Read more

How Fillers Affect the Crystallization Behavior of SLS Powders

NETZSCH AM Copper Fillers Crystallization

Due to the still limited number of available materials for the Selective Laser Sintering process, there is a constant demand for materials with different properties. The addition of any filler to SLS powder typically has an effect on the processing behavior. Today, we investigate the crystallization behavior of PA12 powder filled with copper spheres and flakes.

Read more

New: Additive Manufacturing Materials in Identify

NETZSCH AM Material ProteusV2

The Identify software is one of a kind in the field of Thermal Analysis. Via database comparisons, it only takes a second for Identify to identify and classify your samples. We have added Additive Manufacturing materials to our database! Read more in the article!

Read more